Tennant 7400, Руководство оператора

Страница: 44 / 92

OPERATION
7400 (GM) 330970 (9--04)
42
10. ES mode: Clean the ES filter. If the filter
can’t be rinsed off through the right recovery
tank fill opening, the filter can be removed
from the recovery tank by disconnecting the
ES pump wire and solution hose, and
unscrewing the ES pump cap from the
recovery tank.
11. ES mode: Drain the solution tank. Flush out
the solution tank with clean water. Rinse the
solution outlet filter at the bottom of the tank
through the drain access.
12. Close the tank covers.
13. Replace the drain caps and drain hoses.
14. Unlatch the rear squeegee and tray
assembly. Swing out the assembly.
15. Disconnect the vacuum hose from the side
of the debris tray. Slide the debris tray out,
empty and clean it.
16. Clean the debris screen located at the
bottom of the tray.
17. Slide the debris tray into the rear squeegee
and tray assembly.
18. Connect the vacuum hose. Swing the
assembly back into place and latch.