Tennant 7400 Скачать руководство пользователя страница 26

Страница: 26 / 92

OPERATION

7400 (GM) 330970 (3--05)

OPERATOR SEAT

The operator seat is a fixed back style with a

forward-backward position adjustment.

Adjust: Pull the lever, slide the seat backward or

forward to the desired position and release the

lever.

Lift: Pull up on the seat mounting plate until the

seat mount locks up.

Lower: Pull on the release lever and lower the

seat mounting plate.

LATCHES

The side doors, engine cover, debris tray, back

grille, and solution tank covers are secured with

latches.

Open the brush side doors: Push down on the

door latch.

Open the engine side door: Pull out on the door

latch.

Open the engine cover: Open the engine side

door and pull on the latch release.

Release the debris tray: Pull down on the latch

handle.

Open the back grille: Pull up on the latches.

Open the solution tank covers: Pull up on the

cover latch.

Содержание 7400





























































































Результаты поиска

Содержание 7400

Отзывы:

Похожие инструкции для 7400

Бренды по названию

Популярные бренды

Tennant 7400, Руководство оператора

Результаты поиска

Содержание 7400

Отзывы:

Похожие инструкции для 7400

Бренды по названию

Популярные бренды