Tennant 7400 Скачать руководство пользователя страница 20

Страница: 20 / 92

OPERATION

7400 (GM) 330970 (12--03)

ENGINE SPEED SWITCH

The engine speed switch controls the engine

governed speed. The two indicator lights above

the switch show the engine speed; idle or fast.

Idle: The engine will automatically start in idle

speed. To return the engine to idle from the (Fast)

engine speed, press the engine speed switch until

the left indicator light comes on. The scrubbing

operations will turn off automatically.

Fast: Press the engine speed switch and the right

indicator light comes on. This speed is for

transporting and scrubbing.

NOTE: The engine will automatically operate in

the (Fast) speed when the scrubbing operations

are started.

STEERING WHEEL

The steering wheel controls the machine’s

direction. The machine is very responsive to the

steering wheel movements.

Left: Turn the steering wheel to the left.

Right: Turn the steering wheel to the right.

COVER RELEASE KNOB

The cover release knob releases the machine

front cover latch.

To release: Pull out and hold the cover release

knob, then pull open the machine cover.

10895

Содержание 7400





























































































Результаты поиска

Содержание 7400

Отзывы:

Похожие инструкции для 7400

Бренды по названию

Популярные бренды

Tennant 7400, Руководство оператора

Результаты поиска

Содержание 7400

Отзывы:

Похожие инструкции для 7400

Бренды по названию

Популярные бренды