Tennant 7400 Скачать руководство пользователя страница 38

Страница: 38 / 92

OPERATION

7400 (GM) 330970 (3--05)

ES mode with auto-fill (option): Connect the

hose from the water source to the auto-fill

connection on the machine. Turn the ignition

key to the on position and turn on the water

source. The auto-fill will automatically fill the

tanks to the proper level for ES operation

and automatically shut-off.

ES mode without auto-fill: The ES tanks

can also be filled manually by filling the

solution tanks to 75 mm (3 in) below tank

openings, and filling the recovery tank half

full.

NOTE: If you

do not

want to use the ES system,

do not put any water in the recovery tank. Turn off

the ES switch.

7. Close the tank covers.

SCRUBBING

1. Start the engine.

FOR SAFETY: When starting machine,

keep foot on brake and directional pedal

in neutral.

2. Drive the machine to the area to be cleaned.

3. FaST SCRUBBING: Press the FaST

switch to the FaST system on position and

press the FaST solution flow switch to the

desired solution flow. See the SOLUTION

FLOW SWITCH (FaST) section of the

manual.

NOTE: Leave the FaST switch in the

CONVENTIONAL SCRUBBING position if not

using the FaST system.

Содержание 7400





























































































Результаты поиска

Содержание 7400

Отзывы:

Похожие инструкции для 7400

Бренды по названию

Популярные бренды

Tennant 7400, Руководство оператора

Результаты поиска

Содержание 7400

Отзывы:

Похожие инструкции для 7400

Бренды по названию

Популярные бренды