Snappi Seat Standalone Workshop Manual
Document No: 053-08 v2
Page 12 of 49
March 2019
Snappi Seat Standalone Workshop Manual.doc
•
Using a pair of 13mm spanners,
remove the M8 bolt that secures the
top of the gas spring the back rest of
the seat as shown (see Fig 7.1.1.2,
right). Take note of the positions of
the spacers, washers and nuts.
Fig 7.1.1.2
Fig 7.1.1.3
•
Hinge the gas spring away from the
back of the chair (it will pivot on the
lower bolt) and unscrew the head a
few turns and then remove the lever.
•
Screw the head back onto the gas
spring and lock in place using the
black nut and a 13mm spanner.
•
Fix to the backrest using the M8 bolt,
replacing the washers and spacers in
their original position.
Fig 7.1.1.4
