Snappi Seat Standalone Workshop Manual
Document No: 053-08 v2
Page 35 of 49
March 2019
Snappi Seat Standalone Workshop Manual.doc
Fig 8.23
Recline the backrest of the seat- this is to
provide easier access when fitting the back
pad / cover.
Take the 2” back pad and align the slots in
the back pad with the slots in the backrest
plate- then push down to secure to the hook
/ loop strips.
Fig 8.24
Fig 8.25
Hook the extended backrest cover over the
top of the b
ackrest plate and 2” back pad as
shown (see Fig 8.25, left). Clip the 2 x
poppers in the cover to the mountings on the
backrest plate.
