![background image](http://html1.mh-extra.com/html/tendercare/snappi-seat-standalone/snappi-seat-standalone_workshop-manual_1086387030.webp)
Snappi Seat Standalone Workshop Manual
Document No: 053-08 v2
Page 30 of 49
March 2019
Snappi Seat Standalone Workshop Manual.doc
Slide the assembled plate / cover onto the
locating arms on the seat- with the arms
locating between the cut outs in the cover as
shown (see Fig 8.12, right).
Position the plate so the rear hole on the top
mounting arm is sitting over the plastic plate.
Fig 8.12
Fig 8.13
Use a marker pen / pencil to mark the
location of the top hole onto the masking
tape on the side wing board as shown (See
Fig 8.13, left).