Snappi Seat Standalone Workshop Manual
Document No: 053-08 v2
Page 15 of 49
March 2019
Snappi Seat Standalone Workshop Manual.doc
Next separate the footrest rod from the
adjustor as shown (right).
Fig 7.3.3
Fig 7.3.4
Undo the rear bolt securing the knee angle
adjustor (this bolt goes through the play tray
adaptor), again taking note of the position of
the washers and nuts etc. Remove the bolt
then slide the knee angle adjustor off the
frame. Note it may be helpful to loosen the
rear bolt securing the play tray adaptor if it is
difficult to slide the angle adjustor off the
frame.
Finally, slide the new adjustor onto the frame, and secure using the new bolts and nuts as
supplied (never re use nylock nuts). Please ensure that the rear fixing bolt is tightened again
if loosened in the previous step, and that the frame fixing is placed through the play tray
adaptor as before.
