Snappi Seat Standalone Workshop Manual
Document No: 053-08 v2
Page 28 of 49
March 2019
Snappi Seat Standalone Workshop Manual.doc
Recline the back of the seat and lay flat (for
details on how to recline the seat please
refer to the user manual). Degrease the back
plate with a little white spirit, then wipe clean
with a dry cloth as shown (see Fig 8.6, right).
Fig 8.6
Fig 8.7
Peel off the backing tape from the two long
strips of loop suppled in the kit- and apply
then to the outer edges of the back plate as
shown (see Fig 8.7, left). Note that the
supplied strips are longer than the backrest
plate.
Trim off the excess loop at each end using a
sharp knife as shown (see Fig 8.8, right).
Fig 8.8
