Templari KITA L33, Руководство по установке и обслуживанию

Страница: 59 / 74

59
www.templari.com
16.4 Terminal buttons
-Alarm List of active alarms.
Enter the main menu tree.
Previous mask.
-Up Scroll a list up or increase the value visualized on the display.
-Down Scroll a list down or decrease a value visualized on the display .
-Enter Enter the selected submenu or confirm the set value.
16.5 Terminal display
22:06 30/05/16 Unit:01
T.DHW.:
T.External:
T.Plant:
STATUS:
Off
24.0°C
20.5°C
19.9°C
1 - indication on date, hour and unit connected.
2 - main sizes and active request
No active requests
Hot water active request
Hot water request from primary circuit
Cold water request from primary circuit
Total recover: DHW de cold water from primary circuit
3 - Main active actuators
Contemporary ignition of compressor/s activated
Domestic ho water heating demanded
One of the pumps of the system is on, except for pumps solar collectors
Solar collectors installed and active
Integration system (resistance or boiler) is working.
If the icon “solar collector”, just this one is visualized.
Defrosting, intead of the 2 icons above
4 - Unit condition
The unit can be in the following condition:
• OFF
• ON
• ENERGY S.
• AUTO-OFF
• AUTO-ON
• AUTO-E.S.
• Din-OFF
• BMS-OFF
• ALARM-OFF
• PROTECT
• AUTHOMATIC BOILER MANAGEMENT IF DEMANDED
OFF
The machine is in standby: the frost protection stay active
(inside circulator activation and, if demanded by too cold
outside temperature, compressor activation) contrary the
regulation according to system demand isn’t active.
ON
All functions are active and the machine manage following
the demand of the system.
ENERGY S.
All functions are active and the machine manage according
to setpoint “reduced” (settable in the mask B02, see
below). It allows to save energy.
AUTO-OFF
The machine manages according to timetables set (mask
C02) and following the nominal setpoint (settable in the
mask B01). The machine is OFF.
AUTO-ON
The machine manages according to timetables set (mask
C02) and following the nominal setpoint (settable in the
mask B01). La macchina si trova in stato di ON.
AUTO-E.S.
The machine manage according to timetables set (mask
C02) and following the setpoint of Energy Saving (settable
in mask B02).
Din-OFF
The machine is turned off by an input digital contact (if
provided).
BMS-OFF
The machine is turned off by a supervisor BMS (if provided).
ALARM-OFF
The machine is in OFF because of an alarm.
PROTECT
Frost protection system for cold outside temperature and
system temperature too low: the compressor is active
40°C system temperature is reached
AUTHOMATIC BOILER MANAGEMENT IF DEMANDED
The operation of the boiler is authomaticallu managed by
the heat pump control.