Templari KITA L33, Руководство по установке и обслуживанию

Страница: 21 / 74

21
www.templari.com
Frost proof
depth
min 250mm
Frost
proof
depth
• Example 2 condensate drain
• Example 3 condensate drain with condensate drain
resistance
The condensate drain accumulating during the operation has to
be drained away so that it can freeze. To grant the correct outflow
the heat pump has to be horizontal. The water condensate tube
dhas to have a minimum diameter of 18mm and has to flow in
the drain canal so that it can’t freeze. Don’t drain the condensate
directly into sewage basins and ditches. The aggressive steam and
the condensate pipe, if no frost-protected, can cause irreparable
damages to the evaporator.
In places where there are snowfalls, instal the heat pump 25 cm
from the floor at least to avoid obstructions of the aspiration zone
and the condensate drain.
6.7 Alignment of the outdoor unit
Put the heat pump KITA Templari® horizontal so that the
condensate can outflow. The product has to be installed with the
amortized feed enclosed. The amortized feet increase the height
of the product, facilitating the outflow of the condensate and
reducing the vibrations.
6.8 Probe installation
All probe used for the operation of the plant must be installed
properly in the appropriate wells using a suitable thermal paste.
WARNINGS!
Installing the probes not in a proper way will voids the warranty.
7 Assembly and installation of
the indoor unit
The indoor unit is the interface between the outdoor unit and
the heating/cooling system of the building, and it contains all the
hydronic components necessary to transfer thermal energy.