manualshive.com logo in svg

Teledyne ADFM Analog Output Module, Техническое руководство, Страница: 94 / 156

Поделиться
Скачать
Teledyne ADFM Analog Output Module Скачать руководство пользователя страница 94

Appendix C 

EE - Secondary Depth Max. Probable Error 

Purpose: 

Sets the maximum probable error of the secondary depth sen-
sor. 

Format: EE

nnnn

 

Range: 

nnnn

 = 0 to 1000 (o to 100%) 

Default: EE0020 

(2%) 

Description:  The EE command allows the user to set the maximum prob-

able error (MPE) of the secondary depth sensor.  If the depth 
as determined by the vertical beam is within the MPE of the 
secondary sensor, the vertical beam depth is used.  Otherwise, 
the secondary depth sensor depth is used.  The secondary 
depth sensor must be selected with EZ=x1xxxxx. 

EO - Secondary Depth Zero Offset 

Purpose: 

Sets the secondary depth zero offset in the ADFM. 

Format: EO

nnnn

 

Range: 

8 to 9999 mm 

Default: EO0008 

Description:  The secondary depth zero offset determines the distance above 

the bottom of the channel at which the secondary depth sensor 
is placed.  The default setting of 8 mm is half the diameter of 
the recommended secondary sensor.   

ER - Secondary Depth Span 

Purpose: 

Sets the operating range of the secondary depth sensor. 

Format: ER

nnnnn

 

Range: 

0 to 30000 mm 

Default: ER00000 

Description:  Sets the full-scale depth of the secondary depth sensor in mil-

limeters.  If this value is unchanged (i.e. left at zero), all 
depths will be zero + zero offset (EO-command). 

page C-14 

MGD Technologies, Inc. 

Содержание ADFM Analog Output Module





























































































































































Отзывы:

Нет отзывов