manualshive.com logo in svg

Teledyne ADFM Analog Output Module, Техническое руководство, Страница: 3 / 156

Поделиться
Скачать
Teledyne ADFM Analog Output Module Скачать руководство пользователя страница 3

 

 

ADFM Velocity Profiler 

Technical Manual 

January 2000

 

 

 

NOTE. 

This manual applies to ADFM firmware version 6.37 or higher.  When newer firmware 

versions are released, some commands may be modified or added.  Read the README file on 
the upgrade disk or check MGD’s web site for the latest changes. 

 

 

 

IMPORTANT NOTICE 

MGD Technologies Inc. was acquired as a subsidiary of Teledyne Isco Inc. in December, 2005 and was 
merged into Teledyne Isco in May, 2006. New contact information is printed below: 

 

Teledyne Isco Inc. 

4700 Superior Street 

Lincoln, Nebraska, 68504 

(800) 228-4373     (402) 464-0231 

FAX (402) 465-3022 

E-mail (Customer Service): 

[email protected]

E-mail (Technical Service): 

[email protected]

Web site: 

www.isco.com

 

 

 

 

 

 

 

Copyright © 2000 by MGD Technologies Inc., Copyright © 2006 by Teledyne Isco Inc. - All rights reserved. 

Teledyne Isco P/N 69-7103-001 (January 2000)

 

Содержание ADFM Analog Output Module





























































































































































Отзывы:

Нет отзывов