manualshive.com logo in svg

Teledyne ADFM Analog Output Module, Техническое руководство, Страница: 32 / 156

Поделиться
Скачать
Teledyne ADFM Analog Output Module Скачать руководство пользователя страница 32

Chapter 3 

Suggestions: 

•

 

IBM Compatible Pentium processor 

•

 

Hard Drive (500 megabytes or larger capacity with fast access) 

•

 

Zip Drive (or other hard drive data backup system) 

•

 

Mouse 

3-3 WinADFM 

WinADFM is the recommended program for operating the ADFM.  Please 
refer to the separate software manual for further information.   

3-3.1 Related 

Files 

ADFM Station File (“<siteid>.stn”) 

This file contains the configuration information for a particular monitoring 
location.  See the WinADFM software manual for further information. 

ADFM Log File (“<siteid>.log”) 

This is an ASCII file containing the results of all logged WinADFM opera-
tions for a particular site.  See the WinADFM software manual for further 
information. 

ADFM Chart Settings (“<siteid>.ch1”, “<siteid>.ch2”, “<siteid>.ch3”) 

These files contain the chart settings for a particular site.  See the 
WinADFM software manual for further information.   

ADFM Group File (“<groupname>.sgr”) 

This file contains a listing of ADFM station files contained within a group.  
See the WinADFM software manual for further information.   

ADFM Data Files ("###MDDHH.xxx”) (downloaded from internal recorder): 

Binary data files containing raw data ensembles as recorded by the ADFM 
and downloaded by software to a computer. The naming convention is as 
follows: 

###MDDHH.xxx  

### 

ADFM serial number (labeled on rear of ADFM 
electronics chassis) 

 

M 

Month data was downloaded (1=Jan,...,9=Sep, 
A=Oct, B=Nov, C=Dec) 

 

DD 

Day of month data was downloaded from ADFM 
recorder 

 

HH   

Hour of day data was downloaded from ADFM 
recorder (00 to 23) 

 

xxx 

ADFM recorder deployment number (001 to 999) 

page 3-2 

MGD Technologies, Inc. 

Содержание ADFM Analog Output Module





























































































































































Отзывы:

Нет отзывов