Model CFA-24 Transparent Cable Farm Automation Switch Reference Manual Page 73 of 78
$ set leave <line> <location> <on|off>
Sets a disorderly leave of a line or group of lines on the CPE or CO side of the loop.
<line> either a single channel or a range of channels separated by a colon (e.g., 2:12), or specific channels
separated by a comma
<location> co or cpe side of the loop
<on | off> enables or disables an open
Example 1: set leave on line 1, co side to on
Command: CFA-24:~$ set leave 1 co on (Sets a disorderly leave)
Response: ACCEPTED set leave 1 co on
Command: CFA-24:~$ set leave 1 co off (Reestablishes the line)
Response: ACCEPTED set leave 1 co off
Example 2: set leave on lines 1 to 24, co side to on
Command: CFA-24:~$ set leave 1:24 co on
Example 3: set leave on lines 1, 5, 9, 17, and 24, cpe side to on
Command: CFA-24:~$ set Leave 1,5,9,17,24 cpe on
set cl <vectoring group> colocated <on|off>
Defines one or more vectoring groups as Colocated or Non-Colocated. Equivalent of checking the Colocated checkbox
on the Test Maintenance screen.
<vectoring group> a single vectoring group or a range of vectoring groups separated by a colon (e.g., vg1:vg5)
colocated <off|on> where on defines the vectoring group(s) as Colocated; OR where off defines the vectoring
group(s) as Non-Colocated.
Example
Command: set cl vg1:vg5 on
Response: ACCEPTED set cl vg1:vg5 on
