Model CFA-24 Transparent Cable Farm Automation Switch Reference Manual Page 70 of 78
set term <line><yes|no>
Terminates a specified channel or range of channels.
Valid Values:
<line> either a single channel or a range of channels separated by a colon (e.g., 2:12)
<yes/no> enter yes to terminate the line or no to un-terminate the line and reestablish the previous loop length
Example
Command:
set term 1:3 yes
Response:
ACCEPTED set term 1:3 yes
channel 1 is terminated
channel 2 is terminated
channel 3 is terminated
set termloc <line><co|cpe|both|none>
Terminates a channel independently on either the CO, CPE or both sides.
Valid Values:
<line> a single channel number
<co|cpe|both|none> enter the side or sides of the channel to terminate. Entering <both> has the same functionality as
the command “set term <line> yes”. Entering <none> restores the previous relay setting before the “set termloc”
command was executed.
Example:
Command:
set termloc 1 cpe
Response:
ACCEPTED set termloc 1 cpe
Channel 1 is terminated on CPE side
