background image

THIS WARRANTY IS GIVEN BY TEKTRONIX WITH RESPECT TO THE PROGRAM IN LIEU OF
ANY OTHER WARRANTIES, EXPRESS OR IMPLIED. TEKTRONIX AND ITS VENDORS DISCLAIM
ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. TEKTRONIX' RESPONSIBILITY TO REPLACE DEFECTIVE MEDIA, OR REFUND
CUSTOMER'S PAYMENT IS THE SOLE AND EXCLUSIVE REMEDY PROVIDED TO THE
CUSTOMER FOR BREACH OF THIS WARRANTY.

LIMITATION OF LIABILITY, IN NO EVENT SHALL TEKTRONIX OR OTHERS FROM WHOM
TEKTRONIX HAS OBTAINED A LICENSING RIGHT BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR CONNECTED WITH
CUSTOMER'S POSSESSION OR USE OF THE PROGRAM, EVEN IF TEKTRONIX OR SUCH
OTHERS HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.

THIRD-PARTY DISCLAIMER.

Except as expressly agreed otherwise, third parties from whom Tektronix may have

obtained a licensing right do not warrant the program, do not assume any liability with respect to its use, and do not
undertake to furnish any support or information relating thereto.

GENERAL.

This Agreement contains the entire agreement between the parties with respect to the use, reproduction,

and transfer of the Program.

Neither this Agreement nor the license granted herein is assignable or transferable by Customer without the
prior written consent of Tektronix.

This Agreement and the license granted herein shall be governed by the laws of the state of Oregon.

All questions regarding this Agreement or the license granted herein should be directed to the nearest Tektronix
Sales Of

fi

ce.

ADDITIONAL LICENSE GRANT FOR VIDEO TEST SEQUENCES.

The Software Product may include certain test

patterns, video test sequences and video clips (together “Video Test Sequences”). If so, the following terms
describe Your rights to the Video Test Sequences:

You may use, copy and modify the Video Test Sequences and display or distribute copies of individual Video Test
Sequences in connection with Your video testing activity.

You are not licensed to do any of the following:

1.

You may not distribute the collection of Video Test Sequences, except in connection with the sale of original
equipment containing the Video Test Sequences, without prior written permission from Tektronix.

2.

You may not permit third parties to distribute copies of the Video Test Sequences.

3.

You may not sell, license or distribute copies of the Video Test Sequences on a standalone basis or as part of any
collection, product, or service where the primary value of the product or service is the Video Test Sequences.

You must indemnify, hold harmless, and defend Tektronix from and against any claims or lawsuits, including
attorneys' fees, that arise from or result from the use or distribution of Video Test Sequences as modi

fi

ed by You.

You must include a valid copyright notice on Your products and services that include copies of the Video Test
Sequences.

Содержание RFM220





















































































































Отзывы: