Tektronix RFM220, Руководство пользователя

Страница: 54 / 116

Getting Started
6. Edit the Devices parameters, which are used to govern the communications
for each of the RFM220 instruments that will be monitored by the
RFM220 Aggregator.
a. Do not change the Device Type parameter value from RFM220. This
parameter is for future use.
b. Change the IPAddress parameter to match the IP address
of the RFM220 instrument that will be monitored by the
RFM220 Aggregator.
CAUTION.
The RFM220 software will not work properly if you
have more than one RFM220 Aggregator application monitoring an
RFM220 instrument at a time. The Aggregator can communicate
with multiple instruments at a time, but an individual instrument can
communicate with only one Aggregator at a time.
c. Change the Name parameter to the device name, if any, that is
associated with the RFM220 instrument that will be monitored by the
RFM220 Aggregator. The name you enter here will appear in the
Client Login dialog to help you select a particular RFM220 instrument
when the Aggregator is monitoring multiple RFM220 instruments.
d. Change the CommunicationMode parameter value from Normal to
Secure if you want communications between the RFM220 Aggregator
and the RFM220 instrument CRC'd and veri
fi ed at both ends.
e. Change the FTPCommunication ResponseTimeoutInms parameter
value as needed, based on the performance of your network. This is the
amount of time in milliseconds after which FTP communications with
a monitored RFM220 instrument will time out and a communication
error message will be displayed.
f. Change the HTTPCommunication ResponseTimeoutInms parameter
value as needed, based on the performance of your network.
This is the amount of time in milliseconds after which HTTP
communications with a monitored RFM220 instrument will time out
and a communication error message will be displayed.
g. Change the MaxEventLogEntries RFEventLogs parameter value as
needed to increase or decrease the maximum number of entries in the
RF Event log.
28 RFM220 User Manual