Tektronix RFM220, Руководство пользователя

Страница: 55 / 116

Getting Started
h. Change the MaxEventLogEntries DeviceEventLogs parameter value
as needed to increase or decrease the maximum number of entries
in the Device Event log.
i. Change the DiagnosticLog Level parameter value to control the
amount of logging that occurs for the RFM220 instrument. The
possible values for this parameter are listed below. When this
parameter is set to a value other than Off, the selected message level
and the levels that are above the selected level will be logged.
For example, if Info is set as the logging level, all messages for Info
and Error will be logged. If Verbose is set as the logging level, all
messages for Error, Info, Debug, and Verbose will be logged. Entering
the value Off turns off the logging function. Entering the value All
enables logging of all messages.
Off
Error
Info
Debug
Verbose
All
j. Change the DiagnosticLog MaxFileSizeInMB parameter value as
needed to increase or decrease the maximum
fi le size in megabytes of
each event log.
RFM220 User Manual 29