Tektronix Phaser 220, Справочное руководство

Страница: 80 / 178

5
Selecting Media and Image Options
5-4 Phaser 220 Drivers and Utilities
Selecting the paper source
Using a driver
You can use the Tektronix driver to make paper tray selections, or you can
make these selections by sending to the printer one of the utility Þles. Tray
selection made from the driver overrides the utility Þle sent to the printer.
For Phaser 220 printers with one tray, the tray selection buttons in the driver
have no effect.
If you select the upper or lower tray by one of these methods, the printer
picks paper from the selected tray until the tray is empty. When the tray is
empty, printing stops until the selected tray is Þlled, or until you select the
other tray. If you use a driver that doesn't allow you to select the upper or
lower tray, the printer picks from the lower tray. If the lower tray is empty,
the printer automatically picks from the upper tray if both trays contain the
same size and type of media.
The Paper Source option in the Tektronix drivers lets you select which paper
tray the printer takes paper from. The Phaser 220i and 220e printers come
standard with one perforated-paper tray for metric or U.S. paper sizes. A
lower tray assembly can be added and other tray types can be used (call the
Tektronix Graphics Supplies Order Desk at 1-800-835-6100).
■
Upper Tray
Paper or transparency Þlm is automatically loaded from
the upper tray.
■
Lower Tray
Paper or transparency Þlm is automatically loaded from
the lower tray.
■
Auto Select
Paper or transparency Þlm is automatically loaded Þrst from the
lower tray and then from the upper tray when the lower is empty.