Tektronix Phaser 220, Справочное руководство

Страница: 121 / 178

Using Fonts and SCSI Hard Disks
7
Printing Reference 7-5
Printing a font sampler
You can print a sample of the printerÕs resident fonts, including fonts on a
SCSI hard disk connected to the printer.
Use one of the following Þles depending on your computer type.
Macintosh users
1. The Font Sampler is compressed into the Phaser 220 Samplers.sea
archive Þle on the Macintosh Printer Utilities diskette, and must
be decompressed before you can use it. To decompress this Þle,
follow the steps listed under the topic ÒDecompressing the
Macintosh utility ÞlesÓ in Chapter 1, ÒBefore You Begin.Ó After
decompressing the Þle, continue with the steps listed below.
2. Select the appropriate printer in the
Chooser
.
3. Double-click the Font Sampler self-sending arrow icon.
4. Click OK in the dialog box to send the Þle to the printer.
PC and workstation users
1.
Locate the FONTS.PS Þle in the SAMPLERS directory on the
Printer Utilities diskette.
2. Copy the Þle to your hard disk, or use the Þle from the diskette.
3. PC users : Use the DOS COPY command to send the Þle to
the printer.
Workstation users
: ConÞgure the printer port to receive
PostScript, then send the Þle to the printer.
Macintosh file name PC file name
Font Sampler FONTS.PS