Tektronix Phaser 220, Справочное руководство, Страница: 151 / 178

Using Different Printer Language Modes
9
Printing Reference 9-3
To change CONFIG.PS to specify different timeouts, substitute
new values for
0
and
40
in the
JobTimeOut
and
WaitTimeOut
lines. Permitted timeout values are as follows:
■
JobTimeOut : 0 to 999
■
WaitTimeOut : 0, or 15 to 999
■
To specify no timeout, use
0
In the following example, the timeouts are set to their
default values.
<< /Password ()
/JobTimeOut 0
/WaitTimeOut 40
>> setsystemparams
4.
Use the DOS COPY command to send CONFIG.PS to the printer.
If the printer is connected to a parallel (LPT) port, enter the
following command:
COPY CONFIG.PS LPT X :
where X is the number of the parallel port. If the printer is
connected to a serial (COM) port, enter the following command:
COPY CONFIG.PS COM X :
where X is the number of the serial port.