Tektronix Phaser 220, Справочное руководство

Страница: 111 / 178

Selecting Color Corrections
6
Printing Reference 6-25
Before you print the CMYK, RGB, and HSB color charts
To match colors on the charts to colors selected within an application, use the
same printer color correction to print the charts that you are going to use
when selecting and printing these colors within an application. The
following table lists the driver color correction settings with their
corresponding utility Þles or switch settings. For example, if you are going
to print from an application with the driverÕs
Vivid Blue
option selected,
then print the color chart with the Vivid Blue ( VIVDBLUE.PS ) utility Þle or
set Switch 8 up and Switch 9 down on the Phaser 220i, or set Switch 3 up on
the Phaser 220e. Or, if you are not using a Tektronix driver, use the same
utility Þle or switch setting to print the chart and to print from an
application.
*For the utility Þle color corrections to take effect, Switches 8 and 9 on a Phaser 220i must both be in the up position
(Switch 3 up on the Phaser 220e) before the utility Þle is downloaded to the printer.
**Make sure you use the same color correction to print the chart and to print the colors from an application.
Driver/File/Switch
Driver setting
(Macintosh and
Windows) Macintosh utility
file name* PC utility
file name* Phaser 220i
alternate switch
setting Phaser 220e
alternate
switch setting
Simulate Display Simulate Display DISPLAY.PS
Vivid Blue Vivid Blue VIVDBLUE.PS Or, for Vivid Blue:
Switch 8 up and
Switch 9 down
Use Printer Setting (standard defaults, or
any utility Þle)** (standard defaults,
or any utility Þle)**
Simulate Press Simulate Press SIMPRESS.PS Or, for Simulate
Press:
Switch 8
down
Switch 9 up
None No Color Correction NOCORECT.PS Or, for no color
corrections:
Switch 8
down and
Switch 9 down
Or, for no color
corrections:
Switch 3
down