6
Selecting Color Corrections
6-30
Phaser 220 Drivers and Utilities
PC and workstation users
Note
If you donÕt want to use a utility Þle, you can place Switch 8 and
Switch 9 on the Phaser 220i, or Switch 3 on the Phaser 220e,
down for no color correction.
1.
Copy the
PANT220.PS
sampler Þle from
SAMPLERS
directory on
the Printer Utilities diskette onto your computerÕs hard disk. You
may want to place this Þle in a
Utilities
directory. Or, you can print
this Þle directly from the diskette.
2.
Send the
NOCORECT.PS
Þle to the printer.
a.
Phaser 220i: Place both Switch 8 and Switch 9 in the
up
position.
Phaser 220e: Place Switch 3 in the
up
position.
b.
Locate the
NOCORECT.PS
Þle in the
PHSR220
directory on the
Printer Utilities diskette.
c.
Use the DOS
COPY
command to send the Þle to the printer.
3.
PC users
: To print the PANTONE Color chart, use the DOS
COPY
command to send the sampler Þle to the printer.
Workstation users
: To print the PANTONE Color chart, send the
Þle to the printer.
4.
Select PANTONE Colors within an application using the colors on
the chart.
5.
If you are printing from a Tektronix driver:
Print your document
with the
None
option selected. Any other color correction
selection in the driver will cause the PANTONE Colors to print
differently.
If you are not using a Tektronix driver:
Print your document
with no color correction on a Phaser 220i with Switches 8 and 9 in
the
down
position (Switch 3 in the
down
position on a Phaser 220e).
Содержание Phaser 220
Страница 1: ...Printing Reference Phaser 220 Drivers and Utilities First printing December 1993 070 8870 00 ...
Страница 3: ...Printing Reference Phaser 220 Drivers and Utilities First printing December 1993 070 8870 00 ...
Страница 132: ...7 Using Fonts and SCSI Hard Disks 7 16 Phaser 220 Color Printers ...
