Tektronix Phaser 220, Справочное руководство

Страница: 102 / 178

6
Selecting Color Corrections
6-16 Phaser 220 Drivers and Utilities
Use printerÕs current color defaults
The Use Printer Setting option is available only in the Tektronix Macintosh
and Windows drivers. This option sends no color correction to the printer.
The
Use Printer Setting option uses the current default in the printer to
process colors for printing. The printerÕs defaults can be one of
the following.
■
On the Phaser 220i, if Switch 8 is up and Switch 9 is down ,
Vivid
Blue color correction is enabled.
On the Phaser 220e, if Switch 3 is up , Vivid Blue color correction is
enabled if the vivid blue utility Þle has been sent to the printer.
■
On the Phaser 220i, if Switch 8 is down and Switch 9 is up ,
Simulate Press color correction is enabled (there is no equivalent
switch setting on the 220e).
■
On the Phaser 220i, if Switches 8 and 9 are both up and a color
correction utility Þle is sent to the printer, the utility Þle changes
the printerÕs default setting. If no utility Þle has been sent to the
printer, the factory default,
Vivid Blue , is used.
On the Phaser 220e, if Switch 3 is up and a color correction utility
Þle is sent to the printer, the utility Þle changes the printerÕs
default setting. If no utility Þle has been sent to the printer, the
factory default,
Vivid Blue , is used.
■
On the Phaser 220i, if Switches 8 and 9 are both down, no color
corrections are performed unless you select a color correction
option from the Tektronix driver.
On the Phaser 220e, if Switch 3 is down , no color corrections are
performed unless you select a color correction option from the
Tektronix driver.