Printing from a Workstation
4
Printing Reference
4-9
DEVPARAM.PS
(conÞguring a serial port)
To modify
DEVPARAM.PS
you should be familiar with the PostScript
setdevparams
command, and you should know how to use PostScript
dictionaries and key value pairs. When you change the settings for the serial
port, Switch 7 on the printerÕs rear panel must be
down
for the change to take
effect.
%!
systemdict/languagelevel known {languagelevel 2
eq}{false}ifelse
not {quit} if
mark
{
% Port Settings:
%FlowControl:Dtr/Dsr (Dtr) or Xon/Xoff (XonXoff)
%Parity:Even, Odd, None or Space
%DataBits:7 or 8
%StopBits:1 or 2
%Baud:300,600,1200,2400,4800,9600,19200 or 38400
% (Note: 38400 not valid for
the Phaser II PXe)
% Defaults:
% FlowControl:XonXoff
% Parity:Space
% DataBits:8
% StopBits:2
% Baud:9600
(%Serial_NV%) 6 dict begin
/Password () def
/FlowControl (XonXoff) def
/Parity (None) def
/DataBits 8 def
/StopBits 2 def
/Baud 9600 def
currentdict end setdevparams
} stopped cleartomark
Содержание Phaser 220
Страница 1: ...Printing Reference Phaser 220 Drivers and Utilities First printing December 1993 070 8870 00 ...
Страница 3: ...Printing Reference Phaser 220 Drivers and Utilities First printing December 1993 070 8870 00 ...
Страница 132: ...7 Using Fonts and SCSI Hard Disks 7 16 Phaser 220 Color Printers ...
