Tektronix, Inc. P6240, Руководство пользователя

Страница: 28 / 321

Setting Up for Examples
1–8
TLS 216 User Manual
Reset the Logic Scope
Do the following steps to reset the logic scope to a known factory default state
before doing the examples. (You can reset the logic scope anytime you begin a
new task and need to “start fresh” with known default settings.)
1. Press the save/recall SETUP button to display the Setup menu (Figure 1-4).
SETUP Button
Figure 1-4: SETUP Button Location
The logic scope displays main menus along the bottom of the screen.
Figure 1-5 shows the Setup main menu.
Recall Factory Setup
Menu Item and Button
OK Confirm Factory Init
Menu Item and Button
Figure 1-5: The Setup Menu
2. Press the button directly below the Recall Factory Setup menu item.
The display shows side menus along the right side of the screen. The buttons
to select these side menu items are to the right of the side menu.
Because an accidental instrument reset could destroy a setup that took a long
time to create, the logic scope asks you to verify the Recall Factory Setup
selection. (See Figure 1-5.)