Tektronix, Inc. P6240, Руководство пользователя

Страница: 101 / 321

Choosing an Acquisition Mode
TLS 216 User Manual
3–19
To Check Acquisition Status
To quickly tell if the acquisition system is running or stopped, check the
Acquisition Readout at the top of the display. (See Figure 3-6.) The “acquiring”
state shows the sample rate and acquisition mode. The “stopped” state shows the
number of acquisitions acquired since the last stop or major change.
To check on the overall horizontal setup, press SHIFT
➞
STATUS
➞
System
(main)
➞
System (side).
Acquisition Readout
Figure 3-6: Acquisition Menu and Readout
To Choose an Acquisition Mode
To bring up the acquisition menu (Figure 3-6), press SHIFT
➞
ACQUIRE
MENU.
To choose how the logic scope will create points in the waveform record, press
SHIFT
➞
ACQUIRE MENU
➞
Mode (main)
➞
Sample, Envelope, or
Average (side).
When you select Envelope or Average, you can enter the number of waveform
records to be enveloped or averaged using the keypad or the general purpose
knob.
Select an Acquisition
Mode