TECHNOALPIN M 20 AT, Руководство пользователя

Страница: 20 / 37

TechnoAlpin M20
- 19 -
The turbine pipe will then go into the vertical basic position (illus. 21).
Bild 19
Illus. 21
After this the machine has gone back to the basic position (start position), the heating will be switched off.
If the on phase has ended, the following appears on the display (illus. 22):
Illus. 22
6. LEVEL 2
EBENE 2
SCHNEEQUALIT SOLLDRUCK
AUTOMATIK
SOLLPOS. VER LICHT
SCHNEIBEREIT
SCHWENKEN SCHACHTNUMMER
Level 2 snow quality target pressure automatic snow readiness
Shaft no. swing target position vertical lightning
Level 2 is the menu for changeable parameters, it contains 8 settings:

Snow quality (1...9)

target pressure (10....40 bar)

Automatic operation (on/off)

Snow readiness

spotlight (on/off)

Vertical position (0...5)

Swing width (0....7)

Shaft number (1...255)
The parameters in level 2 can be changed and can be set to a required value.
The snow machine can also be switched on from level 2. The start process is the same as already described as in
level 1.
HOW CAN YOU MOVE AROUND IN LEVEL 2 ?
To change from one data field into the next in level 1, simply press UP or DOWN . When these keys
are pressed longer, you have the function to count values up and down faster.
HOW DO I MOVE FROM ONE LEVEL TO THE NEXT ?
To reach from level 1 to level
2
, press the ENTER key
.
Auto Status
H _ _ 0 Cannon mid
Auto Status
_ _ _ 0 Cannon off