TechnoAlpin M20
- 6 -
Auto
_ _ _ 0
0.0 bar
Off
The snow machine
measures in this case 0.0
bar water pressure
Operational condition; the
snow machine is switched
off.
The snow machine is
set on automatic
operation, it is
switched off.
H
.....Heating turned on
K
.....Compressor turned on
T
.....Turbine turned on
2.0
THE
KEYBOARD
On the M20 snow machine with tower the keyboard is integrated along with the control unit
in the switch box, however the keyboard is fixed on under the tower for machine service. It
is linked to the control unit with a CANbus.
The keyboard has a display with 2x20 symbols and 20 keys.
IMPORTANT: Next to the slave key you will find an emergency off key, to close off the
machine in emergencies.
It is divided into 2 operational levels: the upper gray part for automatic operation, the lower
white part for manual operation.
2.1
OPERATION
OF
DISPLAY,
DIFFERENT
MENUS
AND
VARIOUS
LEVELS
The display has 2x20 symbols. The first line of the display shows the operational situation
(it says whether the snow machine runs automatic mode or manual), it describes the
measured environmental conditions and the calculated values (humid bulb temperature).
The second line serves for the description of the environmental parameters, the calculated
values and for the task of error reports.
The environmental parameters are the following: air temperature, water pressure, relative
humidity, water temperature. The parameters displayed are measured values.
Calculated values are: humid bulb temperature and water capacity, where the displayed
values can slightly differ from the real values.
The 3 lines show
the operational
condition of the
equipment, left to right.
CONTROL
KEYS
Display
KEYS FOR AUTOMATIC
OPERATION
KEYS FOR
MANUAL
OPERATION
Содержание M 20 AT
Страница 1: ...2005 M20 AT USER MANUAL...
