TECHNOALPIN M 20 AT, Руководство пользователя

Страница: 24 / 37

TechnoAlpin M20
- 23 -
Run through level 2, up to the point where snow readiness appears on the display (illustration 28):
Bild 26
illustration 28
The standard temperature stands at
–
2,5 °C.
In the case that this value is to be altered, press the ENTER key, the value begins to flash.
With the UP key the flashing value can be counted upwards at that time, while with the DOWN key
it will be counted off.
To adopt the new value, press the ENTER key.
6.5
SETTING THE SPOTLIGHT
EBENE 2
SCHNEEQUALIT SOLLDRUCK
AUTOMATIK
SOLLPOS. VER LICHT
SCHNEIBEREIT
SCHWENKEN SCHACHTNUMMER
level 2 snow quality target pressure automatic snow readiness
shaft number swing target pos. vertical light
The M20 snow machine switches the spotlight on automatically. From there you have the possibility of closing
down the spotlight.
Go through level 2, until “Light“ appears on the display (illustration 29)
:
Fig. 27
illustration 29
The standard value is ON. If the spotlight is to be turned off, press ENTER , the ON symbol begins to flash.
With the UP or DOWN keys the spotlight can be set to OFF. To adopt the setting, press the ENTER
key.
(The same is valid, when this is once more to be altered.)
- 2,5°C
_ _ _ 0 Snow readiness
ON
_ _ _ 0 Light