TECHNOALPIN M 20 AT, Руководство пользователя

Страница: 26 / 37

TechnoAlpin M20
- 25 -
illustration 31
The pre-set standard value is 0 here. The swing angle set-up on 0 means that that the swinging is not active. If this
value is to be altered, simply press the confirm ENTER key. The shown value begins to flash.
With the menu choice UP key you increase the value, with the DOWN key it is reduced.
To confirm the new set value, press the ENTER key.
The horizontal positioning of the M20 mobile snow machine can only be carried out manually, that means the
swing device must be unbolted using a lever and by means of swivel be brought into the required position. Once
the lever is let go, the swing device blocks itself automatically.
With each swing angle the machine moves without pause through the whole swing area. It stays in both the
extreme points and in the start position for about 10 seconds. This serves to get an idea about the exposed
snow
surface.
The start position, horizontally taken up, serves as starting out point for swinging.
If you want to take up a new start position, you have to push the right and left keys at the same
time for around 3 seconds as soon as the new start position has been reached.
The whole swing area will be once more tested.
Swing angle
0 Width
_ _ _ 0 Swing