manualshive.com logo in svg
background image

viking range corporation

downdraft Ventilators

Warning

reaD anD Save tHeSe inStrUctionS

Warning

to  reDUce tHe  riSk  oF  Fire,  eLectric  SHock,  or 

inJUrY to perSonS, oBServe tHe FoLLoWing:
.  Use this unit only in the manner intended by the manufacturer. 

If you have questions, contact the manufacturer at the address 

or telephone number in the warranty.

2.  Before servicing or cleaning unit, switch power off at service panel  

and lock the service disconnecting means to prevent power from 

being switched on accidentally. When the service disconnecting 

means cannot be locked, securely fasten a prominent warning 

device, such as a tag, to the service panel.

3.  Installation work and electrical wiring must be done by a qualified  

person(s) in accordance with all applicable codes and standards,  

including fire-rated construction codes and  standards.

4.  Sufficient air is needed for proper combustion and exhausting 

of gases through the flue (chimney) of fuel burning equipment 

to  prevent  backdrafting.  Follow  the  heating  equipment 

manufacturer’s guideline and safety standards such as those 

published by the National Fire Protection Association (NFPA), 

and  the  American  Society  for  Heating,  Refrigeration  and 

Air  Conditioning  Engineers  (ASHRAE),  and  the  local  code 

authorities.

5.  When cutting or drilling into wall or ceiling, do not damage 

electrical wiring and other hidden utilities.

6.  Ducted fans must always be vented to the outdoors.

7.  To reduce the risk of fire, use only metal ductwork.

8.  Do not install this product with the activating switch directly 

behind a burner or element. Minimum distance between the 

switch and the edge of the burner should be 4 inches.

9.  Loose-fitting or hanging clothing should never be worn when 

operating  this  appliance. They  may  be  ignited  by  burners/

elements on cooktop.

0. Children should not be left alone or unattended in the area 

where this appliance is in use.

. This unit must be grounded.
to reDUce tHe riSk oF a range top greaSe Fire:
  a)  Never leave surface units unattended at high settings.    

Boilovers cause smoking and greasy spillovers that may    

ignite. Heat oils slowly on low or medium settings.

  b)  Always turn hood ON when cooking at high heat or when  

cooking flaming foods.

  c)  Clean ventilating fans frequently. Grease should not be    

allowed to accumulate on fan or filter.

  d)  Use proper pan size. Always use cookware appropriate   

for the size of the surface element.

to  reDUce tHe  riSk  oF  inJUrY to  perSonS  in tHe 

event  oF  a  range top  greaSe  Fire,  oBServe tHe 

FoLLoWing

a

:

  .  SMOTHER FLAMES with a close-fitting lid, cookie sheet,  

or metal tray, then turn off the burner. BE CAREFUL TO  

 

PREVENT BURNS. If the flames do not go out immedi 

 

ately, EVACUATE AND CALL THE FIRE DEPARTMENT.

  2.  NEVER PICK UP A FLAMING PAN - You may be burned.

  3.  DO NOT USE WATER, including wet dishcloths or towels  

- a violent steam explosion will result.

  4.  Use an extinguisher ONLY if:

   A.  You know you have a Class ABC extinguisher, and you    

  already know how to operate it.

       B.  The fire is small and contained in the area where it  

 

  started.

       C.  The fire department is being called.

       D.  You can fight the fire with your back to an exit.

a

 Based on “Kitchen Firesafety Tips” published by NFPA.

MoDeL 

WiDtH 

BLoWer 

(purchase separately)

vipr101 

30" 

VIDV500 Interior or VEDV900 Exterior

vipr101r 

30" w/ remote control 

VIDV500 Interior or VEDV900 Exterior

vipr161 

36" 

VIDV500 Interior or VEDV900 Exterior

vipr161r 

36" w/ remote control 

VIDV500 Interior or VEDV900 Exterior

vipr181 

48" 

VIDV500 Interior, VEDV900 Exterior or VEDV200 Exterior

vipr181r 

48" w/ remote control 

VIDV500 Interior, VEDV900 Exterior or VEDV200 Exterior

Warning - rangetopS onLY: To reduce the risk of burns or ignition of clothing by reaching across burners, an "R" model 

downdraft (with remote control) MUSt be used with a rangetop. The remote control MUSt be mounted in the countertop - at least  

4" from the burners. See "INSTALL COOKTOP" section on page 8.

!

inStaLLer:  

Save this manual for electrical 

inspector and Homeowner to use.

HoMeoWner:  

Use and care information on page 11.

caUtion

.  For  general  ventilating  use  only.  Do  not  use  to  exhaust 

hazardous or explosive materials and vapors.

2.  To avoid motor bearing damage and noisy and/or unbalanced 

impellers, keep drywall spray, construction dust, etc. off power 

unit.

3.  Clean filters and grease-laden surfaces frequently.

4.  Do  not  repair  or  replace  any  part  of  this  appliance  unless 

specifically recommended in this manual. All other servicing 

should be done by a qualified technician.

5.  Please read specification label on product for further information 

and requirements.

6.  DO NOT INSTALL WITH GRILL MODEL RANGETOPS. This 

will void the warranty.

7.  Models  vipr101SS,  vipr161SS,  and  vipr181SS  (non-

remote units): DO NOT INSTALL WITH RANGETOPS. This 

will void the warranty.

!

 intenDeD For DoMeStic cooking onLY 

!

Содержание VIPR101





































Отзывы: