manualshive.com logo in svg
background image

99042943

P

F20073

proFeSSionaL SerieS

BUiLt-in rear DoWnDraFt WarrantY

one Year FULL WarrantY

Built-in downdraft ventilators, all of their component parts and accessories, except as detailed below*, are warranted to be free 

from defective materials or workmanship in normal household use for a period of twelve (2) months from the date of original 

retail purchase. Viking Range Corporation, warrantor, agrees to repair or replace, at its option, any part which fails or is found 

to be defective during the warranty period. For the purpose of this warranty, normal household use shall not include use of this 

downdraft ventilator with a cooking unit that has a grill. The Viking warranty does not cover any additional ventilation products not 

provided by Viking used in conjunction with Viking downdrafts or ventilator kits. This includes, but is not limited to, such devices 

as booster fans or in-line blowers. Any malfunction caused to Viking ventilation products as a direct result of the use of such 

equipment is not covered under the Viking warranty.

Painted and decorative items are warranted to free from defective materials or workmanship for a period of ninety (90) days from 

the date of original retail purchase. ANY DEFECTS MUST BE REPORTED TO THE SELLING DEALER WITHIN NINETY (90) 

DAYS FROM DATE OF ORIGINAL RETAIL PURCHASE.

Five Year LiMiteD WarrantY

Any ventilator motor which fails due to defective materials or workmanship in normal household use during the second through 

the fifth year from the date of original retail purchase will be repaired or replaced, free of charge for the part itself, with the owner 

paying all other costs, including labor.

This warranty extends to the original purchaser of the product warranted hereunder and to each transferee owner of the product 

during the term of the warranty.

This warranty shall apply to products purchased and located in the United States and Canada. Products must be purchased in 

the country where service is requested. Warranty labor shall be performed by an authorized Viking Range Corporation service 

agency or representative. Warranty shall not apply to damage resulting from abuse, accident, natural disaster, loss of electrical 

power to the product for any reason, alteration, outdoor use, improper installation, improper operation or repair or service to the 

product by anyone other than an authorized Viking Range Corporation service agency or representative. This warranty does not 

apply to commercial usage. Warrantor is not responsible for consequential or incidental damage whether arising out of breach of 

warranty, breach of contract, or otherwise. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential 

damages, so the above limitation or exclusion may not apply to you.

Owner shall be responsible for proper installation, providing normal care and maintenance, providing proof of purchase upon 

request, and making the appliance reasonably accessible for service. If the product or one of its component parts contains a 

defect or malfunction during the warranty period, after a reasonable number of attempts by the warrantor to remedy the defects or 

malfunctions, the owner is entitled to either a refund or replacement of the product or its component part or parts. Replacement of 

a component part includes its free installation. Warrantor’s liability on any claim of any kind, with respect to the goods or services 

covered hereunder, shall in no case exceed the price of the goods or service or part there of which gives rise to the claim.

WarrantY Service: 

Under the terms of this warranty, service must be performed by a factory authorized Viking Range 

Corporation service agent or representative. Service will be provided during normal business hours, and labor performed at 

overtime or premium rates shall not be covered by this warranty. To obtain warranty service, contact the dealer from whom the 

product was purchased, an authorized Viking Range Corporation service agent, or Viking Range Corporation. Provide model and 

serial number and date of original purchase. For the name of your nearest authorized Viking Range Corporation service agency, 

call the dealer from whom the product was purchased or Viking Range Corporation. 

iMportant: 

Retain proof of original 

purchase to establish warranty period.

The return of the Owner Registration Card is not a condition of warranty coverage. You, however, should return the Owner Registration 

Card so that Viking Range Corporation can contact you should any question of safety arise which could affect you.

Any implied warranties of merchantability and fitness applicable to the above described ventilator motor are limited in duration 

to the period of coverage of the applicable express written limited warranties set forth above. Some jurisdictions do not allow 

limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific 

rights, and you may also have other rights which may vary from jurisdiction to jurisdiction.

VIKING RANGE CORPORATION

 Front Street

Greenwood, Mississippi  38930 USA

(662) 455-200

Specifications subject to change without notice.

For more product information, call -888-VIKING (845-464), or visit the Viking

web site at http://www.vikingrange.com

Содержание VIPR101





































Отзывы: