TechniSat DIGIT MF4-K CC, Руководство пользователя

Страница: 115 / 176

11 Troubleshooting guide
115
EN
Problem Possible cause Solution
Various programmes not shown in
programme list Incorrect programme list selected Select another programme list
(see Point 7.2.3.1)
Sound OK, no TV picture Radio mode selected Switch to TV mode
Receiver cannot be operated Defective data stream -->receiver
blocked Disconnect mains plug for approx.
5 secs., then reconnect receiver
Remote control not working Batteries are spent Change batteries
Incorrect remote control option
selected Change remote control option
(see Point 2 and 6.2.3)
Time not displayed in stand-by
mode Time not downloaded Switch to e.g. ZDF for 30 seconds
No picture, no sound, display not on No mains power Check mains cable and plug
No reception of programmes previo-
usly received Programme now transmitted on
another channel Perform scan (see Point 8.4)
Programme no longer being trans-
mitted None
Receiver cannot be switched on or
cannot be operated Receiver blocked Perform Flash Reset: Note!
All personal settings will be lost.
>
Disconnect mains plug.
> Simultaneously press program-
me up/down key
on receiver
and keep pressed down.
> While programme up/down key
is pressed, reconnect mains
plug.
> Keep keys pressed down for
approx. 5 secs. until message
* “FLAS” appears.