8.5.4 Copying the settings
You have the facility to copy all the settings, such as pro-
gramme list, antenna settings, etc. of your digital receiver
(sender) to another digital receiver (receiver) of the same
type, and using the same version of the operating software.
(Fig. 8-24)
>
To do this, connect the two receivers by means of a
null modem cable.
>
Switch on the (destination, receiving) receiver.
>
To copy the settings, press any operating key on the
(source, sending) receiver.
The settings of the source receiver will now by trans-
mitted to the destination receiver. Please note any
messages displayed on screen.
8.6 System configuration
Use this menu item to view the specific receiver data
(e.g. current software version).
>
Use the
arrow keys up/down
to mark this line in
the sub-menu
Settings
.
>
Confirm by pressing
OK
.
>
Press the
Menu
key to return to normal operation.
8.7 Encryption/decoding system
This menu point takes you to the sub-menues for the
Smartcard used, and for the CI module. You can view infor-
mation related to the Smartcard or the CI module used by
selecting the Smartcard or the CI interface, by pressing the
arrow keys,
then confirm by pressing
OK
.
Manual Initialisation of the CI module
>
You can initialise the CI module manually by pressing
the
red
function key
CI Reset
.
110
(Fig. 8-24)
Содержание DIGIT MF4-K CC
Страница 175: ...175...
Страница 176: ...2233450008600 280706...
