7.16.5 Programming a new timer event
>
To programme a new timer event, use the
arrow
keys up/down
to mark a blank line in the menu
Timer overview
.
>
Press the
yellow
function key
New
to go to the entry
window allowing you to programme a new timer event.
Complete this in accordance with
Point 7.16.1
.
>
Use the
arrow keys up/down
to mark the additio-
nal window displayed:
Type
.
>
Confirm by pressing
OK
. A window showing the timer
types available will be displayed.
>
Use the
arrow keys up/down
to select the desired
timer type.
>
To accept the timer type, confirm by pressing
OK
.
>
When you have completed the programming, press
the
yellow
function key
Accept
to accept the data
into memory.
Please note!!!
Please ensure that the receiver has acquired the time. This
will be shown in the display while the unit is in stand-by
mode. If this is not the case, leave the receiver switched on to
a major programme such as ZDF for approximately 30
seconds, so that the receiver can acquire the current time.
Now the time should be shown in the display while the recei-
ver is in stand-by mode (provided this was activated in Point
6.2.4).
8 Changing the basic programming
8.1 Configuring the Favourites list
This chapter describes how you can change the pre-program-
ming of your digital receiver as well as the Favourites pro-
gramme list in accordance with your own preferences. This
function is also required to sort newly found programmes into
the programme list
after a programme scan has been performed.
In this regard you should know the following: your receiver is
equipped with two programme lists, the
Favourites list
and the
Total list
. The Favourites programme list includes
all the programmes you have accepted into the list according
to the procedure described below. The Total list includes all
programmes.
94
Содержание DIGIT MF4-K CC
Страница 175: ...175...
Страница 176: ...2233450008600 280706...
