7.15.7.1 SFI Information
Use the
SFI Info
to obtain brief information on the marked
channel or programme. If SFI information is available, this is
indicated by a
next to the appropriate programme.
>
Use either the
arrow keys
or the
function keys
to
mark the desired programme.
>
Press the
SFI
key to display the information.
You can scroll or page through lengthy information text
using the
arrow keys
.
>
Press the
Back
key to return to the previous table.
7.15.7.2 SFI timer programming
The electronic programme guide SFI allows you to program-
me timer events with particular ease.
>
Use the
arrow keys
or the
function keys
to mark
the desired programme.
>
Press the
red
function key
Timer
to open a selection
window.
>
Use the
arrow keys up/down
to mark the required
Timer type
(see Point 7.15).
>
Confirm by pressing
OK
. The menu
Manage timer
showing the data relating to the programme selected
will be displayed, so that you can check on the cor-
rectness. If required, you can make changes in this
menu (see 7.15).
>
Press the
Back
key to return to the previous table.
The relevant line is marked. Depending on the timer
type in use, the receiver will now be switched on at the
commencement of the selected programme. If the
receiver was switched on by means of the video recor-
der timer, this will be indicated by the message “rEc”
shown in the display.Most of the functions of the remo-
te control are disabled at this stage, to avoid acciden-
tal interruption of the recording.
In stand-by mode, an active timer is indicated by the
colon in the time display blinking, or by the LED.
Deleting a SFI timer event
>
If you would like to cancel a timer event programmed
via the SFI, proceed as described above, to mark the
appropriate programme.
88
Содержание DIGIT MF4-K CC
Страница 175: ...175...
Страница 176: ...2233450008600 280706...
