11. Maintenance & Cleaning
2004-10
Technical Manual for sunrise RC, TW, TS, TC, BC, 6F No. T 137 302 Rev No. 1.1
11-1
11. Maintenance & Cleaning
11.1 Introduction
This chapter contains the following procedures on how to:
•
Replace the lamp
•
Replace the filter carriages
•
Replace the main input fuses
•
Clean the instrument
•
Disinfect the instrument
WARNING
REMOVE THE MICROPLATE BEFORE DOING ANY MAINTENANCE.
11.2 Lamp Replacement
Note
The instrument specifications can only be guaranteed if genuine Tecan
parts are used.
The following steps must be followed to replace the lamp:
Before starting to replace the lamp leave the instrument to cool down for at least
thirty minutes.
1.
Switch off the instrument and disconnect it from the main supply.
Lamp compartment
