10. Sunrise Service Tool Kits for Sunrise RC and Options
2004-10
Technical Manual for sunrise RC, TW, TS, TC, BC, 6F No. T 137 302 Rev No. 1.1
10-3
10.4 QC Pac 2 Service Software:
The difference between the QC Pac 2 standard software and the QC Pac 2
Service software version is, that the Service version uses tighter tolerances then
the standard version. Therefore, a final test using the QC Pac 2 Service version
should be performed after repairing the instrument.
The QC Pac 2 Service software can be used together with any QC Pac 2 plate if
the following steps are performed:
1. Install the QC Pac 2 Service software
2. Copy the QC Pac 2 standard software plate data file into the new directory
See example Diagnosis printout. Below:
