TEC Sterling, Руководство пользователя, Страница: 11 / 26

General Overview
NOTICE:
THE BURNER VENTURI TUBES SHOULD BE
INSPECTED FOR SPIDER WEBS AND OTHER
OBSTRUCTIONS PRIOR TO EACH USE. IF ANYTHING IS
FOUND, CLEAN THE TUBES COMPLETELY. A CLOGGED
TUBE CAN LEAD TO A FIRE BENEATH THE GRILL.
NOTICE:
NEVER OPERATE THE STERLING G-SERIES
GRILL WITHOUT THE RADIANT GLASS EMITTERS
PROPERLY INSTALLED AS DESCRIBED ON PAGE 5.
THE BURNERS SHOULD NOT COME IN CONTACT WITH
WATER OR OTHER CLEANING FLUIDS, WHICH CAN
DAMAGE THE BURNERS, CAUSING THEM TO
FUNCTION IMPROPERLY.
Burner Ignition and Operation
Procedure:
1. If ignition does not occur in 5 seconds, turn burner
to OFF, wait 5 minutes, and repeat lighting
procedure.
2. Open the grill hood. Ensure the Gas Valve is closed
and that the top of the cooking grid is not covered.
3. For LP gas, open the Gas Valve on the Cylinder
using the Handwheel.(See Figure 2, Page 7.)
For Natural gas, open the gas valve in the main line.
4. Depress and rotate the Burner Output Knob to
HIGH. (See Figure 5.)
5. Slowly rotate Spark Igniter knob clockwise twice and
check for flame. If flame is not present turn Burner
Output Knob to OFF and wait 5 minutes. Repeat
steps 4 and 5.
6. For maximum cooking speed and searing intensity,
maintain the Burner Output Knob at HIGH for 1 to
2 minutes with the hood open, then close the hood
and continue operation at HIGH for an additional 7
to 9 minutes to accomplish a total preheat time of 8
to 10 minutes on HIGH. For slow cooking, maintain
Burner Output Knob at HIGH for 3 to 5 minutes
with the hood open. Then, rotate Burner Output
Knob to desired cooking level.
7. To extinguish the flame, depress and rotate the Burner
Output Knobs to OFF.
Operation
9
Push Button Spark Igniter
LOW
HIGH
Figure 6.
Grill Knobs and Igniter Button
Figure 5.
Burner Output Knob
Burner Output Knob
Burner Output Knob
Burner Output Knob