3-6
3. INSTALLATION PROCEDURE FOR THE OPTIONAL EQUIPMENT
EM18-33011
■
Expansion memory and drawing size
(Revision Date: Feb. 10, 2000)
3.4 Ribbon Saving Module (B-4905-R-QM)
Applicable
Type
RAM
Capacity
Old CPU PC
Board
(Ref. No.
0Dxxxxxx
or earlier)
NEW CPU PC
Board
(Ref. No.
0Exxxxxx
or later)
512KB
1MB
2MB
104.0 x 384.0
104.0 x 896.0
104.0 x 896.0
Max. drawing size (normal)
(W) x (H) (mm)
Batch
Strip Auto-cut
104.0 x 192.0
104.0 x 448.0
104.0 x 448.0
Max. drawing size (on-the-fly)
(W) x (H) (mm)
Remarks
Standard
((IC21)
Option
(IC21,22)
Standard
(IC19)
Batch
Strip
Auto-cut
3.4 Ribbon Saving Module (B-4905-R-QM)
Fig. 3-9
Screw (SM-4x8B)
Ribbon Shaft
Ribbon Stopper
Print Block
Solenoid Attaching Plate
1. Turn the head lever counterclockwise to release the ribbon shaft holder plate.
2. Remove the ribbon stopper from the ribbon shaft on which the ribbon is wound. Before removing the
ribbon stopper, check its attaching direction for later installation. Remove the ribbon stopper from the
ribbon shaft on which the ribbon is wound.
3. Remove the two SM-4 x 8 screws to detach the solenoid attaching plate.
Description
Ribbon Saving Module
Q'ty/Unit
1
NOTE:
Addition of the D-RAM can expand the memory of the old CPU PC board up to 1MB, however,
the expansion of the memory module is not required for the new CPU PC board, which is equipped
with the 2MB memory as standard.
