Teac DS Series, Инструкция по эксплуатации, Страница: 89 / 104

DS Series Instruction Manual 2006.12
Page 81
Param
[Param] is used to save and load the setting conditions and to initialize the settings.
System
[System] is used to format the hard disk drive, to set the date and time, and to shut down the
system.
Network
[Network] is used for setting the network parameters.
At the <Net Config> tab, you can set the network parameters of the system.
At the <Net Drive> tab, you can specify the shared folder name to transfer the data. Make sure
to set the shared folder name before operating the data transfer. Use the fixed IP address to set.
You cannot use the host name to mount the network drive.