Teac DS Series, Инструкция по эксплуатации, Страница: 23 / 104

DS Series Instruction Manual 2006.12
Page 15
6. RECORD CONDITION SETTINGS
At the <RECORD> menu, you can set recording amp settings and general recording functions of
the main unit, such as input range and input mode of each channel, a recording target device,
sampling frequency, and number of recording channels, by using the LCD and keys of the DS unit.
To enter the <RECORD> menu,
1.
Confirm that the system is in ready state (<READY> display).
(If the system is not in ready state, press the STOP key a few times depending on the hierarchy
of the current menu to move to ready state.)
2.
Press the ENTER key to display the main menu <MENU>. (Below example is for the
recording only unit.)
3.
Press the ENTER key by confirming the cursor is in [RECORD].
4.
The <RECORD> menu is displayed.