Tatoma VN Series Скачать руководство пользователя страница 54 | Manualshive

Страница: 54 / 91

Tatoma VN Series Скачать руководство пользователя страница 54

VERTICAL TOWED MIXER - ONE AUGER

VN & V SERIES

Tatoma Ag Equipments Corp. Located in Colcord, OK. Phone (918) 422-4271

- 53 -

LOADING THE MIXER

The loading will be carried out by pouring the ingredients through the upper part of the
tub using vehicles suitable for carrying out this type of operation.

The addition of mineral supplements or correctors to the mixture can be done through
the access ladder. The following safety recommendations should be taken into account.

Keep clean the steps of the ladder and never
jump onto the ground from the ladder, there
is a danger of injury due to a possible slip or
fall.

Do not add any mechanism or system
element that allows access to the tank above
the height level that marks the last step of
the ladder.

The mixer has a scale system that allows to control the amount of each ingredient
loaded into the mixer.

During the loading process, the safety recommendations and warnings in this section
and throughout the

owner’s

manual should be respected at all times.

«
...
52
53
54
55
56
...
»

Содержание VN Series




























































































Отзывы:

Нет отзывов