VERTICAL TOWED MIXER - ONE AUGER
VN & V SERIES
Tatoma Ag Equipments Corp. Located in Colcord, OK. Phone (918) 422-4271
- 18 -
- The area where the maintenance of the mixer is done should
be sufficiently ventilated. Never do these works with the tractor
engine running in a closed building. Exhaust gases can cause
suffocation.
- Before working inside the mixer, stop the vehicle completely,
apply the parking brake, disengage the power take-off and
power cables, turn off the engine and remove the ignition key.
- Make sure all moving parts of the accessories have stopped
completely before performing any maintenance work.
- Always use a safety system to block the wheels, such as parking blocks. Never use a
jack to support or support the mixer while doing such work.
- Always use the most appropriate tools and equipment for the type of work you do by
hand. Always wear protective gloves and be very careful when making adjustments.
- Replace all covers and protections after repair and before moving the mixer.
- After work, make sure that all the tools, parts and equipment
that have intervened in the service are collected separately.
- Pressurized fluid can penetrate the skin through openings
and small wounds and cause serious injury or death.
- Avoid this danger, relieving hydraulic pressure before
disconnecting any hydraulic line. Tighten all connections
before applying pressure.
- Never use your hands to locate hydraulic leaks in pressure
pipes. Look for possible leaks with a small piece of cardboard
where oil is reflected and protects hands and body from high
pressure fluids.
- If this accident occurs, go to the nearest medical
center immediately. The fluid injected into the skin
should be surgically removed within the first few
hours or it could cause gangrene.
- Do not allow grease to accumulate and remove
spilled oil immediately from the ladder and the
operator platform and other access areas. Keep all
access areas clean and clear of obstacles.