Tatoma VN Series Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 91

Tatoma VN Series Скачать руководство пользователя страница 39

VERTICAL TOWED MIXER - ONE AUGER

VN & V SERIES

Tatoma Ag Equipments Corp. Located in Colcord, OK. Phone (918) 422-4271

- 38 -

4. When you check that the mixer has been hitched correctly, please retract completely
the mechanical jack with the handle (M). In case of having a hydraulic jack, it is necessary
to completely loosen the wheel (V) till the jack is fully retracted and then release the
latches (F) folding the jack to an horizontal position.

5. Tighten the handwheel (V), remove the lever and place it on its support.

Once the mixer is hooked, raise the support foot to its upper stop
to avoid hitting with possible obstacles on the ground during the
ride.

Parking the mixer:

1. Park the mixer in a flat area, away from ditches, slopes, etc., that in the event of a
slide could cause the mixer to overturn. Operate the support foot until it comes into
contact with the ground.

If the jack is mechanical, operate the crank (M) and if it is hydraulic, use the lever (P).
Make sure in advance that the wheel (V) is fully tightened.

2. Raise the mixer, using the jack, until you can release the hitch from the tractor easily,
removing the corresponding bolt with your hand.

3. If the mixer is fitted with a hydraulic jack, remove the lever (P) and put it back on its
support.

«
...
37
38
39
40
41
...
»

Содержание VN Series




























































































Отзывы:

Нет отзывов