VERTICAL TOWED MIXER - ONE AUGER
VN & V SERIES
Tatoma Ag Equipments Corp. Located in Colcord, OK. Phone (918) 422-4271
- 37 -
FRONT JACK
The mixer is equipped with a mechanical front jack, that allows to facilitate the coupling
with the mixer or its correct parking. It comes equipped with a mechanical jack manually
driven (M).
The mixer can be requested with a hydraulic jack. This one is activated by means of a
lever (P) and an independent pump.
In order to use the hydraulic jack, proceed as follows:
Hitching the mixer:
1. Approach the tractor to the hitch of
the mixer respecting at all times the
safety recommendations included in this
manual;
2. Adjust the height of the mixer hitch to
the tractor attaching point, acting on the
handle (M) in the case of the mechanical
support foot. If the mixer has a hydraulic
jack, put it in position and operate the
lever (P) to raise the mixer height, and
slowly release the wheel (V), to lower it.
3. Make the coupling with a bolt with the
adequate diameter, respecting the
safety recommendations included in this
manual.