Target FeedMaster-RF Скачать руководство пользователя

Страница: 22 / 72

TARGET FEED MASTER RF

TARGET FEED MASTER RF rev.09

5.3.2 Ongoing Operations

The following menu gives the actual status of the ongoing opera-

tions in each house.

Hint:

The following menu can quickly be accessed by pressing the

corresponding shortcut key.

Select the desired house from the

main menu using the arrow keys.

Press the right-arrow key.

Press the right-arrow key once again

to select the

"1. Information"

menu.

The following pieces of information

are displayed :

Bird Age

Feed Today

: Tells if the birds are going to be fed today.

Current Cycle

Total Weight:

Total amount of feed to be delivered to the current

drop. This value only appears when a feed cycle is active.

Delivered:

Amount of feed that has been delivered to the current

drop. This value only appears when a feed cycle is active.

Bin Auger:

Shows which bin auger is currently active. This value

does not appear if no feed cycle is active.

Output Auger:

Shows which output auger is currently active. This

value does not appear if no feed cycle is active.

Current Drop :

Shows which drop is currently active. This value

does not appear if no feed cycle is activated.

Actual Weight:

Current amount of feed in the scale.

Scale Status:

Fill / Weigh / Dump / Close.

4.1 House 1 Info

Age: 10

Feed Today Yes

Current Cycle: 2

Total Weight: 20

Delivered: 3

Bin Auger: 2

Current Drop: 7

Actual Weight: 0.70

Scale Status: Dump

TARGET FEED MASTER RF

TARGET FEED MASTER RF rev.09

5.8.5 Relay Assignment

The feed scale controller controls the operation of On/Off relays

which are located on external modules. These modules are called

TRB. The mapping between the outputs and the relays is defined

by the user. Templates are available at the end of this manual to

make the assignment easier.

Each TRB relay box must has its own ID number so that the feed

scale controller can communicate with it. ID # 2 to 7 are used for

this purpose.

Module ID Assignment
ID#2 use relay 1-8
ID#3

1-16

ID#4

17-32

use relay
use relay

RELAY BOX (8 RELAYS)

RELAY BOX (32 RELAYS)

ID #2

OFF

ID #3

OFF

ID #4

Содержание FeedMaster-RF









































































Результаты поиска

Содержание FeedMaster-RF

Отзывы:

Похожие инструкции для FeedMaster-RF

Бренды по названию

Популярные бренды

Target FeedMaster-RF, Руководство пользователя

Результаты поиска

Содержание FeedMaster-RF

Отзывы:

Похожие инструкции для FeedMaster-RF

Бренды по названию

Популярные бренды