TROUBLESHOOTING &
MAINTENANCE
PERIODIC MAINTENANCE
Bearings
All ball-bearings are packed with grease, and do not need any more
maintenance.
Pre-Stretcher
If the machine is in daily use, the Gears under the plastic cover on the
dispenser should be greased with P.T.F.E. based grease to gears every 50hrs..
Cutter / Film Holder
The cutter / film holder is pre-adjusted from the factory and does not need
further adjustments. When replacing spare parts, it is necessary to adjust it.
Cleaning
The machine should be cleaned and oiled regularly and at the end of the
wrapping season.
When using high pressure washing apparatus, care must be taken with
the electrical installation.
Also make sure that water is not sprayed directly into the bearings, etc. Keep
the control box protected from rain and water. If necessary use compressed
air to dry electrical components.
Hydraulic Cylinders
Make sure that all hydraulic cylinders are closed when storing the machine.
Quick Couplers
Ensure that the quick couplers are kept clean and apply the dust caps after
use.
Storage
The machine should be parked on a dry place during the closed season.
Nut & Bolts
All nuts and bolts should be tightened after the first hour’s use, thereafter
regularly.
Road Wheels
Wheel pressure should be normally kept at 42 psi depending on bale weight
and field conditions.
A100 EH Operator’s Manual
44 //
49
